Revo's 06 IX MR

[revobasher]

Figured I'd start a project thread over here as well..

--

Performance:

DB Tuned by Shane (picked up 80hp+ on e85 conversion)
CBRD BBK Full ported Turbo
FIC 1250cc Injectors
BAP
GSC S1 Cams
WORKS Aperture TB Seals
ETS 3.5” IC with ETS upper pipe
Muse LICP
Walbro In-Tank 255lph Fuel Pump
APS dual-vent BOV
Perrin Intake
Hallman Pro MBC
MAP Ported/Polished/Coated Exhaust Manifold
MAP o2 Housing
DC Sports Catless Downpipe
GReddy Evo2 Catback

Suspension:

Robispec KW V3 Clubsports
Robispec Rear Sway Bar
Whiteline Front Roll Center Kit
Whiteline Rear Trailing Arm Bushings
Whiteline Rear Bump Steer Kit
Vorshlag High Castor Front Camber Plates

Stoppage:

StopTech Slotted Rotors, front and rear
Hawk HPS Front Pads
StopTech Street Rear Pads
StopTech Stainless Braided Lines
Motul Fluid

Trans:

5 Speed RS Swap with all new parts
Spec Stage 3+ Clutch with Billet Flywheel
Speed Source Shifter Base and Cable Bushings

Wheels\Tires:

Summer:
Enkei RPF1: 17x9.5 +18 front, +38 rear
Falken Azenis RT-615k 255/40/17
Drop Engineering open-ended Lugs
Winter:
Stock MR BBS
225/45/17 Semperit Winter Sports

Interior:

Autometer triple dash pod
STACK Gauges-- Wideband, Oil Pressure, Boost
Trustz Gauge Overlays
Alpine CDA-105 Headunit
Boston Acoustics SC65 Speakers

Exterior:

Evo 7 Tail Lights

--

[B.J.@Toxicfab]

Car looks good man, clean! Nice power with the BBK Full too!

[Joekapp]

Lookin good!! I want your wheels!!

[Lumpydonut]

soooooo sexy!

[revobasher]

Thanks guys.. hit the dynojet a few weeks ago:

[Rooster Booster]

I love it... how's the spool on that BBK??? Are u running spacer on your enkei wheels??

[silverbullet2010]

Car looks great. And very nice numbers.

[Joekapp]

I'm curious. How come the different offsets on the wheels?

[revobasher]

Spool is fantastic.. no lag at all.. The wheels are +18 front, +38 rear.. no spacers at all!

[revobasher]

Figured I would update this.. not much has changed recently though other than my new Halo gauges. I am trying to decide what to do next with the car. I'd really like to be around 600hp and running 10s. But I can also see my self giving autox a go as well. I know I am not going to get much more out of this stock block considering I am at 438tq already and am pushing it's limits. Given the mods I already have, what do you guys think I need to do to get there? Guessing it would be cheaper being proactive by beefing up the existing 2.0 before I blow it up and need a new shortblock.

[Yme]

nice car Revo

[mullen]

how much rolling and pulling did you do to fit the 17x9.5s?

[revobasher]

nice car Revo

Thanks man

how much rolling and pulling did you do to fit the 17x9.5s?

None actually.. but they barely fit and rub just slightly with the wheel turned all the way..

[Yme]

Thanks man



None actually.. but they barely fit and rub just slightly with the wheel turned all the way..

Put fenders on I have a thing for fenders.

Are you gonna be upgrading your BBK to the new ball bearing?

[revobasher]

Put fenders on I have a thing for fenders.

Are you gonna be upgrading your BBK to the new ball bearing?

Yep! Just waiting for the right time.. and I have to figure out what a used BBK Full ported is even worth these days.. there are plenty of reds for sale I think people might prefer that due to their popularity.

[B.J.@Toxicfab]

Yep! Just waiting for the right time.. and I have to figure out what a used BBK Full ported is even worth these days.. there are plenty of reds for sale I think people might prefer that due to their popularity.

Depending on the miles & condition of your BBK I will guess no more then $1275...

[revobasher]

Thanks. That's about was I was thinking

[Arkitek]

Great looking car! nice build!

[revobasher]

^^ Thanks man!

[revobasher]

Going to be a busy week for me. Tomorrow heading to MAP for:

- Long runner tubular exhaust mani with FP bolts\studs (baseline and post dyno's will be posted)
- Custom UICP
- Turbosmart Race Port 50mm BOV
- New air intake
- Battery relocation

Weds:

- Tint

Thurs:

- Speed density tune

And I have the Zaklee clear cam cover on order.

I'll have my perrin intake, APS BOV and ETS UICP up for sale soon in case anyone is interested.

[bryan24207]

any underhood shots so we can see that UICP and BOV installed?

[Yme]

can't wait to see the results between the stock map ported and the long runner.

[Rooster Booster]

Absolutely LOVE this car!!!! You have great taste in power and LOoks!!!
I say this because I too love the mid range and quick response of the BBK full this is the turbo I plan on running in the future, RPF1s are also the wheels I plan on getting hopefully next year!!!

[revobasher]

any underhood shots so we can see that UICP and BOV installed?

Yep. I'll post em tomorrow

[revobasher]

Absolutely LOVE this car!!!! You have great taste in power and LOoks!!!
I say this because I too love the mid range and quick response of the BBK full this is the turbo I plan on running in the future, RPF1s are also the wheels I plan on getting hopefully next year!!!

Thx man!

[Chris]

My first time in here but damn nice selection of parts. You could just build a new engine while you still enjoy yours. Just buy a few things at a time and end up with a bulletproof bottom end.

[revobasher]

Thx, Chris

Below are the latest engine bay shots. Will post updated ones tomorrow.

[bryan24207]

oh u run a recirc?

[Chris]

You need a tuck job more than Rupaul. Route that throttle cable under the strut bar on the fire wall. You can flip the main injector harness upside down but running it under the manifold looks 10xs better.

[bryan24207]

also loved how u "de-badged" your optima red top, i think ima try that lol